Three clear signs you need to replace concrete floor coating

Replace Concrete Floor Coating

If you have recently notice that the concrete surface on your driveway, or even your walkways, is starting to look bad, it might be time to repair or replace it. You may notice that there are signs of chipping, cracking, or even pieces missing, which are obvious signs that something needs to be done fast. In some cases, you may be able to repair the damage that has been done, but in most cases, it’s much better to simply replace what is there. You wanted to look as pristine as possible, and here are three clear signs that you will need to replace concrete floor coating that is there right now.

What Causes This Damage?

There are a multitude of reasons that there could be damage on your concrete floor. For example, if it is extremely old, perhaps two decades or more, it is likely going to break down naturally. If this is out in the open, and is introduced to weathering on a seasonal basis, this is going to lead to cracking and chipping. In fact, your concrete is going to chip very easily if you are constantly using a walkway and dropping things from time to time. There is also the possibility that the concrete slab underneath the sinking as a result of the ground shifting underneath the surface. Ask for help to this Industrial Flooring Contractor, to find out the real cause of the damage to your concrete floors.

Should You Repair Or Replace It?

From a monetary perspective, the cheapest way to fix the problem, whichever one it is, is to simply repair it. You can purchase different components that a local home improvement store to get the job done fast. However, it’s always better to replace it if there are definite cracks that simply cannot be sealed. Additionally, if there are missing pieces, you will simply want to remove what is there and put something new.

Signs That You Will Need To Replace Your Concrete Coating

The type of concrete coating that you have can often determine how soon you need to replace it. There are different materials that can be placed on top of concrete including cement overlays, epoxy coatings, and also various types of pain. If you have this in the garage, it is likely epoxy, whereas any exterior concrete slabs will probably have a cement overlay. If this is an expensive coating, such as a polymer-modified overlay, it’s going to cost you a substantial amount of money to not only replace it, but remove what is still there. Therefore, if you see signs of chipping, cracking, or discoloration, it is likely time for you to replace it.

How Much Will It Cost To Replace It?

The cost for replacing existing concrete coating will depend on the material. For example, it is just paint, it will come out to about four dollars per square foot. If it is a polymer-modified overlay, you are going to pay about six dollar a square foot. The most expensive is likely going to be epoxy and about $15 per square foot.

How Soon Should You Do This And When?

As soon as you see signs of chipping occurring, and also cracking, it’s time to get this done as soon as possible. However, choosing a time to do this is a very important decision as there are certain seasons where this will simply not be possible. For example, doing this during the winter, or the late fall, is not recommended. On the other hand, if it’s late spring or early summer, this would be an appropriate time. It’s good to have clear weather, lots of heat, and the ability to work for extended periods of time without having to worry about inclement weather.

Should You Hire A Professional?

Depending upon the type of concrete floor coating that you are using, you may be able to do it yourself. This would include going to the local hardware store to purchase any epoxy coating. Paint will also be available. However, if you are planning on doing a brand-new cement overlay, this might be something that will require a professional. The cost of these component can be high, and if you make a mistake with the overlay, you will have to get another one which can become very expensive.

Now that you know the signs to look for if you want to replace a concrete floor coating, these options will help improve its overall appearance. You will need to get tools to remove the existing coating, such as a cement overlay, or products that you can get at a home improvement store to remove the epoxy or paint. Once you have replaced the existing top coating on your cement, you should send it down, making sure that the top layer is going to remain once a fixed. After you are done, you will be very happy with the final result as it will look as it did years ago.

Leave a Reply

Your email address will not be published. Required fields are marked *