Fire cylinder suppression systems play a very important role when it comes to fire safety is mainly used for controlling or putting out fire early and efficiently. These systems are required in many areas such as in the offices, in industries, and even in homes which are prone to fires. This article briefly describes the principles of operation for the suppression systems of fire cylinders, the classification of these systems, as well as the advantages they provide.
Table of Contents
What Do Suppression Systems for Fire Cylinders mean?
Fire cylinders suppression systems products are used in extinguishing the fire before it gets out of hand and lead to a lot of devastation. These systems basically include fire detection alarms, control panels and fire suppressing agents in cylinder. Once fire is sensed, it discharges the suppression agent that may come in form of gas, foam or water mist to put out the fire.
Types of Fire Suppression Systems
Clean Agent Systems: Clean agent suppression systems use gases such as FM-200, Novec 1230 or carbon dioxide to suppress fires. These gases are non-conductive, no corrosive effect and do not deposit on the surface of the equipment, which makes them suitable for use in the data centers, laboratories and electrical rooms.
Water Mist Systems: The water mist suppression systems employ thin and smaller droplets of water that minimize the heat and encroach the supply of oxygen to the fire consequently putting off the flames. These systems are efficient and they use lesser water than sprinkler systems and hence they cause minimal damage in the event of a fire.
Foam Suppression Systems: Fuel storage facility is one of the areas that use foam suppression systems most often. The foam smothers the fire by depriving it of oxygen and starves the fire of oxygen so that it cannot continue to blaze.
CO2 Systems: CO2 suppression systems are employed where use of water or foam is counterproductive such as electrical compartments or server rooms. It weakens the oxygen supply reducing the availability of this element on the fire leading to its fast extinction.
Dry Chemical Systems: These systems are useful in reducing dangers that stem from fires that have a propensity to ignite flammable liquids, gases and electrical equipment. The dry chemical powder does this by ‘balancing’ the reaction that is causing the fire and put it out almost immediately.
Advantages of Fire Suppression Systems
Rapid Response: Fire suppression systems are intended to both identify fires and put them out on an independent basis without human intervention thus minimizing the time between outbreak and extinguishment. Such a response helps avert the risk associated with damage and loss within a very short span of time.
Minimized Damage: Depending on the suppression agent used in such systems, they will always help minimize the amount of loss that results from fire disasters. Clean agents for instance do not leave behind any residue and they can safely be used near electronics.
Safety: Suppression systems play a vital role of maintaining safety of occupants in case of a fire outbreak. They can put out or contain fire within few seconds, thus giving people enough time to escape and minimizing so many losses such as loss of life.
Compliance with Regulations: As mentioned above, a number of industries mandatorily need to install fire suppression systems for being in compliance of the legal norms. It also goes a long way in satisfying the regional buildings fire safety code requirement for your facility.
Protection of Assets: Suppression systems assist in conserving resources, such as equipment, inventory, and property through making it difficult for the fire’s spread, hence minimizing loss.
Maintenance and Testing
It is important to note that the fire suppression systems also need to be tested and maintained at a regular basis so that they will work as expected in the presence of fire. The potential activities include the check pressure of fire cylinders, examination of nozzles/piping and testing of detection charge of fire equipment as well as control system test. It is advised to have a professional fire safety company to conduct these inspections often in order to ensure compliance as well as effectiveness.
Fire cylinders are needed to be protected by certain suppression systems and it is one of the main requirements to fire safety plan. Due to the rapid detection as well as suppression of fire, such systems play the vital roles of safeguarding people and other valuable properties, and assets from the terrible impacts of fire. Whether business-oriented, industrial or household, choosing a proper fire extinguishment system is one of the largest safety precautions and concerns. The former also assures easy identification of problematic areas that need fixing while the latter guarantees that when applied most is needed, the system will work as required.